LY-J425

符合

GB E4311 EQUIVALENT NORM: AWS E6011

Description:

LY-J425 is a high cellulose potassium type welding electrode for carbon steel.It is specially suitable for vertical-down welding.Both AC and DC can be applied and it shows a fine appearance with high welding efficiency. Don’t swing electrode too much when welding,the length of the arc should be controlled properly and it is not suitable for multi-layer or face welding.

用途:

Suitable for butt,fillet and lap welding for thin plates structures,such as smoke pipes,wind pipes,oil tanks of transformer,outside cover of vehicles,etc.

ATTENTION:
a.Generally ,welding elecrodes do not need bake before welding.
b.If damped,the electrodes should be baked for 0.5-1 hour at the temperature of 70-80℃ before welding.


Online Service

Sales Hotline

免费网站看v片在线18禁无码_最近的2019中文字幕国语电影_成熟妇女性成熟满足视频_8050午夜二级