LY-501

符合

GB/T 5293 F5A0-H08A EQUIVALENT NORM:AWS A5.17 F6A0-EL8

Description:

LY-501 is aluminium titanium type acid sintered flux; alkalinity is 0.5-0.8,spherical particles , granularity is 10-60mesh;it shows good welding performances :stable arc, a fine appearance of weld,slag easy to remove,and has good gas porosity-resistibility. It has no sensitivity of few rust,high temperature oxidation film as well as other impurities.Both AC and DC can be applied and when DC, the wire should be contacted straight polarity.

用途:

Matched proper wire,e.g.H10Mn2,etc,it is used for welding steel structures,such as boilers,pressure vessels,bridges,oilcans,ships and so on.

ATTENTION:
a.Before welding,the welding flux should be baked at the temperature from 300 to 350℃ for 1-2 hours .
b.Before welding,the weld metal must be cleared away impurities ,such as rust,oil,moisture etc.


Online Service

Sales Hotline

免费网站看v片在线18禁无码_最近的2019中文字幕国语电影_成熟妇女性成熟满足视频_8050午夜二级